RUB
Drobemetny installation for cleaning of a welded metalwork in Chelyabinsk online-store ZMO, OOO | Buy Drobemetny installation for cleaning of a welded metalwork Chelyabinsk (Russia) | ZMO, OOO : Allbiz
Platinum
Reviews: 1
ZMO, OOO
+7 (800) 550-53-02
Drobemetny installation for cleaning of a welded metalwork
  • Drobemetny installation for cleaning of a welded metalwork

Drobemetny installation for cleaning of a welded metalwork

In stock
Payment:
  • Cash,
  • Invoice payment,
  • Cash on delivery
  • In detail
Shipping:
Description
Drobemetny installation for cleaning of a welded metalwork Drobemetny installation of type through passage is intended for cleaning of a welded metalwork of dirt, scale, a rust and other superficial pollution. The equipment makes firing of a surface of the preparation placed there by powerful blows of fraction, and thus clears it of pollution and a rust, scale from welding and oxidation, than gives surfaces rather rough uniform distributed metal gloss. Thus, improves a type of a welded metalwork and high - quality rolled metal, and also increases quality of the subsequent painting and increases function of protection against corrosion. Components are: directly the chamber of drobemetny cleaning, entrance and output tight chambers providing prevention of a departure of fraction and the polluted air in shop, drobemetny devices, system of recirculation and separation of fraction, system of ventilation and purification of air, the entrance and output rolgangovy conveyor with the electric drive and stepless adjustment of speed of giving. The chamber of type through passage is intended for continuous automatic drobemetny cleaning of products in vertical position. The product is placed on the rolgangovy conveyor perpendicularly to the direction of a throwing of fraction. Drobemetny devices are located perpendicularly to the direction of progress of a product. Entrance and output sections of drobemetny installation are equipped with blinds (in two ranks) from wearproof rubber which prevent a fraction departure in the course of work. As soon as the product passes through an entrance opening of a chamber, automatically, with a certain delay locks of fraction open and its giving on drobemetny devices begins so that the product was processed evenly and carefully. The fulfilled polluted fraction falls through a combined funnel of a cabin on the screw conveyor conducting to a ladle elevator which lifts fraction to system of recirculation and separation of fraction where there is a separation of fraction, suitable for return, from rough and small particles. The cleared fraction gets to the bunker from which by means of the dosing gate comes back to drobemetny devices again. After an exit of the processed product from a working zone drobemetny process automatically stops if on an entrance to a chamber the next product does not appear. This equipment is the high - integrated, mechanized and automated system. In the equipment modern technologies of a filtration which allow to exclude environmental pollution are applied, high automation gives the chance to qualitatively make processing of products, and also to cut a fraction consumption. Drobemetny installation, thanks to reliable system of sealing of a chamber of a drobemetny otchistka, allows to make loading/unloading of preparations in operating time.

Parameters / Model

HP8016

HP1018

Driving rolgangovy conveyors

Permissible load

1000kg/m ²

Transfer speed

(stepless regulation)

transportation speed: 0. 4 ~ 4. 6m/mines

speed is working: 0. 4 ~ 2. 6m/mines

Power (outside of a chamber)

2×3кВт

Length of the rolgangovy conveyor

entrance 10600 mm

output 10200 mm

The amount of the processed preparation

Length

≤ 12000 mm

Width

≤ 800 mm

≤ 1000 mm

Height

≤ 1600 mm

≤ 1800 mm

Size of a loading opening (Width × Height)

900×1700мм

1100×1900мм

Productivity of drobemetny installation

0. 8 ~ 1. 2m/mines

Noise level

≤85dB (A) (GB3096 - 93)

Extent of air pollution

100mg/m ³ (GB16297 - 96)

Preparation surface after cleaning

class A - B Sa2. 5 (GB8923 - 88)

Preparation surface roughness

Ra 12. 5 ~ 50μm (GB1031 - 95)

Fraction

Hardness

HRC40 ~ 45

Granularity

Ø1. 2 ~ 2. 0mm

Recirculation volume

4000 ~ 4800 kg

Drobemetny devices

Model

Q698Z

Quantity

8 pieces

Productivity

8×220кг/мин

Firing speed

80m/sec.

Power

8×11кВт

Kovshovy elevator

Loading capacity

100t/hour

Power

7. 5kvt

Separator

Productivity

100t/hour

Stream speed

4 ~ 5m/sec.

Power

4 kW

Longitudinal screw

Productivity

100t/hour

Power

4 kW

Cross screw

Productivity

100t/hour

Power

4 kW

System of dust removal

Filter

Type

the bag filter with a pulse purge

Productivity

15000 m ³ / hour

Efficiency

99. 8%

Power

18. 5kvt

Centrifugal fan

Model

4 - 72 No. 5A R90 °

Productivity

6906 m ³ / hour

Pressure

9419 Of Pa

Power

15 kW

Compressed air

Expense

1 m ³ / mines

Pressure

0. 4 ~ 0. 6mpa

Entrance tension and frequency

380/220B, 50 Hz

General power

128. 5kvt (without compressor for compressed air)

Overall dimensions, (Д×Ш×В)

26350×4560×5480мм

26350×4760×5680мм

depth of underground part 1318 of mm

Weight

20 t

22 t

Information is up-to-date: 23.03.2021

Read more

Unbelievable price on Drobemetny installation for cleaning of a welded metalwork in Chelyabinsk (Russia) company ZMO, OOO.
Shipping method
Payment method
LiveInternet